OUR EXCLUSIVE 14 STEP CLEANING PROCESS
1. Inspection of Rugs
Thoroughly inspect your rugs again to see if there are any problems we might have overlooked.
2. Remove excess sand with rug beater
Lay rugs face down and beat our excess sand
3. Neutralize the Colors
This prevents all colors from bleeding and locks in the dyes.
4. Pre-Treat & Scrub Fringes
Pre-Treat the fringes with a cleaning solution which remains on the fringe for five (5) minutes. This returns them to their original colors. (i.e. White, Beige, Tea Dye, Off-White).
5. Pre-Treat Spots on Rugs
Pre-Treat the rugs with spotters and spot clean.
6. Rinse
Rinse the Rugs to remove all dirt in the rug and then soaked in cold water to revitalize the natural sheen of the fibers.
7. Clean the Back & Front of the Rugs
8. Deodorize Rugs
Deodorize the rugs front and back in a contamination bath, if needed.
9. Rinse
Rinse the front and back to get rid of all soap so there is no residue, which would cause the rug to get dirty faster.
10. Send Rugs through Wringer
To rinse out any remaining soap and water and then add our special conditioner.
11. Lay Rug Outside Flat to Dry
Lay it outside to dry flat for four (4) hours where the sun revitalizes the bright rich colors without harming the natural dyes. This is the way the rugs are treated when they are made in Iran, Persia, India and Turkey.
12. Flip Rug Over
13. Groom Rug to Perfection
Set the pile to the original direction.
14. Bring to Drying Room
Hang it to dry for 24 hours before we remove it from the drying room and re-inspect it to assure quality and re-spot if needed. Wrap in brown paper for delivery.